Serpentine Dam, Western Australia Totally Explained

Everything about Serpentine Dam Western Australia totally explained

Serpentine Dam is one of the major water supply dams for Perth, Western Australia. The dam is used to store water which is released at a controlled rate to regulate the level in Serpentine Pipehead Dam, which in turn feeds water to the metropolitan trunk main network depending on demand.
Construction of the dam was completed in 1961.

Specifications

Reservoir capacity - 137.7 GL
Surface area at full storage - 10.67 km²
Catchment area - 664 km²
Reservoir length - 16 km
Height above lowest foundation - 55 m
Width of base - 350.5 m

Further Information

Get more info on 'Serpentine Dam Western Australia'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://serpentine_dam__western_australia.totallyexplained.com">Serpentine Dam, Western Australia Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.